Since the first report of the photoelectrochemical water splitting using n-type
TiO2 in 1972 [5], TiO2 has drawn more and more attentions in this field and is regarded as one of the most promising materials as photoanode for solar water splitting, considering its high chemical stability, low cost, and nontoxicity [6, 7]. Early efforts in using TiO2 material for solar water splitting were mainly focused on the nanoparticle-based thin films for their large surface area-to-volume P505-15 ratios. However, the high charge carrier recombination and low electron mobility at the grain boundary limit the performance of the films [8, 9]. Recently, researches shifted to the one-dimensional nanostructure including nanorods [10–12], nanotubes [13–15], and nanowires
[16, 17]. Various fabrication processes were developed for the synthesis of TiO2 nanorods, nanowires, or nanotubes, such as catalyst-assisted vapor–liquid-solid (VLS) [16], hydrothermal process [10], electrochemical anodization [18, 19], etc. However, TiO2 is a wide band gap semiconductor, only absorbing UV-light, which suppresses its further applications. Considerable Selleckchem MG-132 efforts have been devoted to improve the photon absorption and Elafibranor solubility dmso photocatalytic activity of TiO2 nanostructures, including synthesizing branched structures [20], exposing its active surface [21], hydrogen annealing process [22, 23], and sensitizing with other small band gap semiconductor materials such as PbS [14], CdSe [24], and CuInS [25]. Doping with other elements to tune the band gap of TiO2 is another efficient method to improve the photocatalytic activity. N, Ta, Nb, W, and C have been successfully incorporated into TiO2 photoanode and been demonstrated with enhanced photoconversion efficiency [26–29]. Besides, the SnO2/TiO2 composite fibers have also emerged and showed well photocatalytic
property [30, 31]. Based on these researches, we expect that the incorporation of Sn into TiO2 would be an attractive approach since the small lattice mismatch between TiO2 and Chlormezanone SnO2 is beneficial for the structural compatibility and stability. Meanwhile, the doping would significantly increase the density of charge carriers and lead to a substantial enhancement of photocatalytic activity. In this work, we successfully realized the controlled incorporation of Sn into TiO2 nanorods by a simple solvothermal synthesis method and investigated the role of Sn doping for enhanced photocatalytic activity in photoelectrochemical water splitting. Methods In our experiments, a transparent conductive fluorine-doped tin oxide (FTO) glass was ultrasonically cleaned in acetone and ethanol for 10 min, respectively, and then rinsed with deionized (DI) water. Twenty-five milliliters DI water was mixed with 25 mL concentrated hydrochloric acid (37%) in a Teflon-lined stainless steel autoclave. The mixture was stirred for several minutes before adding of 0.8 mL tetrabutyl titanate (TBOT).